Nail Free Adhesive Glue 400Ml Quick-Drying Super Strong Nail Free
Gule
Junbond® JBN1 has a strong adhesion, can be the greatest alternative to nails, no
surface drilling to fix and bond wood, doors and windows, gypsum
board, medium density fiberboard, stone, ceramic tile, metal,
plastic, rubber and other materials.
Product Features:
1, Super strong initial viscosity, high bonding strength;
2, Wide range of uses, the vast majority of substrates can be
bonded, and even wet wood can be bonded;
3, Flexible, weathering, waterproof, non-brittle, will not affect
the adhesion of buildings contraction movement;
4, Will not subsidence, can be sealed, dry paint;
5, Does not contain formaldehyde, benzene and other harmful
substances;
6, Anti chemical corrosion, anti cold, high temperature.
Application Method:
1.1,Clean the base material surface to ensure no oil and dirt.
1.2,Cut the cartridge mouth, poke the aluminum film with a nozzle.
Put on the nozzle and extrude the glue with a caulking gun.
1.3,Light material sticking method: Put a proper amount of glue
on the back of material that needs to be sticked, then put on the
base material,
then press tight and fit.
1.4,Heavy material or fast bonding method: After glue, pressurize
and
tighten up the material, then gently pull open. Air for 1-2
minutes,
then pressurize and tighten up the material again.
1.5,Large material no need separation bonding method:
Glue on the surface of both material that need to be sticked,
scrape the glue evenly with a scraper. Air for 3-5 minutes,
then pressurize and tighten up the material.
1.6,After pressurize and tighten up the material,
24 hours to reach the use of strength. 72 hours to reach the best
strength.
Precautions:
1, Nail free glue has not yet been solidified, the loose oil can be
used to remove dry after the use of scraping or grinding in
addition to residual stains exposed. The product can be used with
the laying of the floor.
2, High temperature adhesion will be weakened (to avoid long-term
bonding in the sunshine of the metal).
| Name | Nail free sealant |
| specification | 400ML |
| Color | White |
| Promoter Composition | Solvent |
| Characteristic | Bonding almost all building materials |
| Shelf life | Pls check product label |
Charactertics:
1- Easy to apply
2- For general construction, remodeling, maintance & repair
projects
3- Reduces nail pops & fastener use
4- Bonds dry wall, paneling & plywood to wood or steel framing.
5- Heat and water resistant
6- Quick-grab formula requires less bracing
Application Areas:
1- Wood to wood assemble application.
2- Metal joints to lumber, lumber and treated lumber.
3- Prefinished panels.
4- Bathroom fixtures.
5- Fiber glass shower enclosures.
Caveat:
1- The product is a dangerous product, should be stored in a cool,
dry place. Construction environment must be well ventilated, away
from high temperature and fire source;
2- The product should be stored in children can not get to avoid
contact with the eyes, not dumped into the sewer. If swallowed,
should be immediately sent to hospital for emergency treatment, and
produce the product container or label;
3- If the use of the process of dizziness and other adverse
conditions, immediately to the outdoor fresh air or immediately
seek medical attention.
4- If the product contact with the eye, rinse with water for 15
minutes, then immediately seek medical attention.
Color
* White
Storage:
Storage Instruction: Store cartridge in dry and cool place
Shelf life: 24 months from the date of manufacturing.
Product TDS:
| Serial NO. | Test Item | Testing Standard | Testing Result | Individual Evaluation |
| 1 | Appearance | Uniform viscous liquid,no suspended matter,no visible mechanical admixture,no phase separation phenomenon,White. | Uniform viscous liquid,no suspended matter,no visible mechanical admixture,no phase separation phenomenon,White. | Qualified |
| 2 | Tack free time,min | ≤20 | 7 | Qualified |
| 3 | Extrudability,ml/min | >=250 | 379.5 | Qualified |
| 4 | Nonvolatile Content,% | >=60 | 65.5 | Qualified |
| 5 | Droop,(N type),mm | ≤3 | 0.5 | Qualified |
| 6 | Shear Strength(72h),MPa | >=2.0 | 2.52 | Qualified |
| 7 | Initial viscosity shear strength(0.5h),MPa | >=0.5 | 1.12 | Qualified |
| 8 | Dry heat resistance
(90ºC,30min) | Restore room temperature, no bubble, no cracking | No bubble, No cracking | Qualified |
| 9 | Storage Conditions | --------- | -5ºC-40ºC,Keep away from open fires and children |
Application:
Junbom Hui Bei Factory
Package & Delivery
Exhibition
FAQ
Q1: Are you factory?
A1: Yes, we are factory.
Q2: Can I do an OEM?
A2: Yes,we do the brand, logo as your requirements.
Q3: What other products do you have?
A3: Besides our mainly products silicone sealant, and polyurethane foam, we also have many other products, such as liquid nails,beauty
sealant,glass glue,polyurethane foam cleaner ,foam gun and silicon
gun etc.
Q4:Why we choose you? What is your strength?
A4:With 30 years experiences in this field, we are a professional supplier of
the well-know customers. Our facilities conform to the standard
audit requirement and our products meet the certification terms
from different countries and areas.
Q5: Agent's wanted?
A5: Welcome general agent all over the world.
Q6:What is your sample policy?
A6: We can supply 2-3 samples for free, but as this is aerosol
products with pressurized gas, it is dangerous goods, we only
supply the Cured sample.And the freight cost need to be prepaid by
customers.
If you want to know more details information, pls just feel free to
contact us! :)
