Room Temperature Curing Wooden Floor And Door Frame Edge Bonding No
More Nail Sealant
Junbond® JBN1 is a synthetic rubber adhesive specially formulated for
construction applications. With excellent adhesion capabilities,
the product is ideally suited to most building materials including
concrete, galvanized metals, aluminium, and many different kinds of
wood.
Applications:
1-Ensure surfaces are free of oil, grease and dust.
2- Stick to dry timber: apply spots or a bead of adhesive on
surface. Assemble parts immediately and press together firmly
bonding together with both surface.
3- Stick to wet timber: smooth surfaces or heavier material. Work
with the clamps, temporary fastners and fixation(To be bonded 24
hours then remove the clamps or fasteners). Bond will continue to
strengthen over 2-3 days and full cure is achieved in 7 days.
Application Method:
1.1,Clean the base material surface to ensure no oil and dirt.
1.2,Cut the cartridge mouth, poke the aluminum film with a nozzle.
Put on the nozzle and extrude the glue with a caulking gun.
1.3,Light material sticking method: Put a proper amount of glue
on the back of material that needs to be sticked, then put on the
base material,
then press tight and fit.
1.4,Heavy material or fast bonding method: After glue, pressurize
and
tighten up the material, then gently pull open. Air for 1-2
minutes,
then pressurize and tighten up the material again.
1.5,Large material no need separation bonding method:
Glue on the surface of both material that need to be sticked,
scrape the glue evenly with a scraper. Air for 3-5 minutes,
then pressurize and tighten up the material.
1.6,After pressurize and tighten up the material,
24 hours to reach the use of strength. 72 hours to reach the best
strength.
| Name | Nail free sealant |
| specification | 400ML |
| Color | White |
| Promoter Composition | Solvent |
| Characteristic | Bonding almost all building materials |
| Shelf life | Pls check product label |
Charactertics:
1-Easy to apply
2-For general construction, remodeling, maintance & repair projects
3-Reduces nail pops & fastener use
4-Bonds dry wall, paneling & plywood to wood or steel framing.
5-Heat and water resistant
6-Quick-grab formula requires less bracing
Application Areas:
1- Wood to wood assemble application.
2- Metal joints to lumber, lumber and treated lumber.
3- Prefinished panels.
4- Bathroom fixtures.
5- Fiber glass shower enclosures.
Hint and warning:
- This product is a chemical product. A slight corrosive reaction to
foam, mirrors, paint and mercury. Avoid long skin contact.
- It must be used in the ventilation. Far away from high temperature
and fire.
- Keep out of reach of children. Avoid polluting water source.
- After empty packing and unfinished products are dried, please treat
them with environmental protection
Color
* White
Package & Storage:
Packaging: 300ml/pcs, 24pcs/ctn. 90g/pcs, 12pcs/small ctn, 6 smal
ctn/ctn
Storage Instruction: Store cartridge in dry and cool place
Shelf life: 24 months from the date of manufacturing.
Product TDS:
| Serial NO. | Test Item | Testing Standard | Testing Result | Individual Evaluation |
| 1 | Appearance | Uniform viscous liquid,no suspended matter,no visible mechanical admixture,no phase separation phenomenon,White. | Uniform viscous liquid,no suspended matter,no visible mechanical admixture,no phase separation phenomenon,White. | Qualified |
| 2 | Tack free time,min | ≤20 | 7 | Qualified |
| 3 | Extrudability,ml/min | >=250 | 379.5 | Qualified |
| 4 | Nonvolatile Content,% | >=60 | 65.5 | Qualified |
| 5 | Droop,(N type),mm | ≤3 | 0.5 | Qualified |
| 6 | Shear Strength(72h),MPa | >=2.0 | 2.52 | Qualified |
| 7 | Initial viscosity shear strength(0.5h),MPa | >=0.5 | 1.12 | Qualified |
| 8 | Dry heat resistance
(90ºC,30min) | Restore room temperature, no bubble, no cracking | No bubble, No cracking | Qualified |
| 9 | Storage Conditions | --------- | -5ºC-40ºC,Keep away from open fires and children |
Application:
Junbom Hui Bei Factory
Package & Delivery
Exhibition
FAQ
Q1: Are you factory?
A1: Yes, we are factory.
Q2: Can I do an OEM?
A2: Yes,we do the brand, logo as your requirements.
Q3: What other products do you have?
A3: Besides our mainly products silicone sealant, and polyurethane foam, we also have many other products, such as liquid nails,beauty
sealant,glass glue,polyurethane foam cleaner ,foam gun and silicon
gun etc.
Q4:Why we choose you? What is your strength?
A4:With 30 years experiences in this field, we are a professional supplier of
the well-know customers. Our facilities conform to the standard
audit requirement and our products meet the certification terms
from different countries and areas.
Q5: Agent's wanted?
A5: Welcome general agent all over the world.
Q6:What is your sample policy?
A6: We can supply 2-3 samples for free, but as this is aerosol
products with pressurized gas, it is dangerous goods, we only
supply the Cured sample.And the freight cost need to be prepaid by
customers.
If you want to know more details information, pls just feel free to
contact us! :)
