Bonding In Renovations And Assembly Techniques 18Ml Junbond No More
Nail Sealant
Junbond® JBN1 a general purpose construction adhesive suitable for bonding a
wide variety of building materials
Product Features:
1, Super strong initial viscosity, high bonding strength;
2, Wide range of uses, the vast majority of substrates can be
bonded, and even wet wood can be bonded;
3, Flexible, weathering, waterproof, non-brittle, will not affect
the adhesion of buildings contraction movement;
4, Will not subsidence, can be sealed, dry paint;
5, Does not contain formaldehyde, benzene and other harmful
substances;
6, Anti chemical corrosion, anti cold, high temperature.
Application Method:
- Use a caulking gun to extrude the adhesive as bead onto one surface
in strips or dabs.
- Make sure to apply the adhesive to the edge of the panels.
- Press the surfaces together immediately and for better adhesion,
batter down with a hammer. The pressure applied plays an important
role in the final bonding strength.
- For heavy components or for vertical fixing, use a support until
the adhesive is completely cured.
- Apply the sealant under usual industrial hygiene standards. Make
sure to work in a place that offers good ventilation. If it is not
sufficiently ventilated, make use of breathing equipment.
- Supex No Nails adhesive can be used
on all surfaces, except PS, PP and PE.
- Before application, it is advised to do a preliminary compatibility
test.
General purpose construction:
As a contact adhesive for the installation of wall and floor panels
Metal, timber & other sheets of plan materials to concrete, plaster
or other rigid surfaces
Most bonding applications where high strength, gap filling one
component adhesive is required
Timber, metal, cementitious and plaster sheets to timber or metal
studs
Installation of battens or other fixings to brick, masonry or
concrete walls
Industrial bonding of plinths, wall panels, and skirting boards.
Bonding of plasterboards, polystyrene isolation and decoration
panels and ceramic tiles.
Precautions:
1, Nail free glue has not yet been solidified, the loose oil can be
used to remove dry after the use of scraping or grinding in
addition to residual stains exposed. The product can be used with
the laying of the floor.
2, High temperature adhesion will be weakened (to avoid long-term
bonding in the sunshine of the metal).
| Name | Nail free sealant |
| specification | 400ML |
| Color | White |
| Promoter Composition | Solvent |
| Characteristic | Bonding almost all building materials |
| Shelf life | Pls check product label |
Application Areas:
1- Wood to wood assemble application.
2- Metal joints to lumber, lumber and treated lumber.
3- Prefinished panels.
4- Bathroom fixtures.
5- Fiber glass shower enclosures.
Caveat:
1- The product is a dangerous product, should be stored in a cool,
dry place. Construction environment must be well ventilated, away
from high temperature and fire source;
2- The product should be stored in children can not get to avoid
contact with the eyes, not dumped into the sewer. If swallowed,
should be immediately sent to hospital for emergency treatment, and
produce the product container or label;
3- If the use of the process of dizziness and other adverse
conditions, immediately to the outdoor fresh air or immediately
seek medical attention.
4- If the product contact with the eye, rinse with water for 15
minutes, then immediately seek medical attention.
Color
* White
Storage:
Storage Instruction: Store cartridge in dry and cool place
Shelf life: 24 months from the date of manufacturing.
Product TDS:
| Serial NO. | Test Item | Testing Standard | Testing Result | Individual Evaluation |
| 1 | Appearance | Uniform viscous liquid,no suspended matter,no visible mechanical admixture,no phase separation phenomenon,White. | Uniform viscous liquid,no suspended matter,no visible mechanical admixture,no phase separation phenomenon,White. | Qualified |
| 2 | Tack free time,min | ≤20 | 7 | Qualified |
| 3 | Extrudability,ml/min | >=250 | 379.5 | Qualified |
| 4 | Nonvolatile Content,% | >=60 | 65.5 | Qualified |
| 5 | Droop,(N type),mm | ≤3 | 0.5 | Qualified |
| 6 | Shear Strength(72h),MPa | >=2.0 | 2.52 | Qualified |
| 7 | Initial viscosity shear strength(0.5h),MPa | >=0.5 | 1.12 | Qualified |
| 8 | Dry heat resistance
(90ºC,30min) | Restore room temperature, no bubble, no cracking | No bubble, No cracking | Qualified |
| 9 | Storage Conditions | --------- | -5ºC-40ºC,Keep away from open fires and children |
Application:
Junbom Hui Bei Factory
Package & Delivery
Exhibition
FAQ
Q1: Are you factory?
A1: Yes, we are factory.
Q2: Can I do an OEM?
A2: Yes,we do the brand, logo as your requirements.
Q3: What other products do you have?
A3: Besides our mainly products silicone sealant, and polyurethane foam, we also have many other products, such as liquid nails,beauty
sealant,glass glue,polyurethane foam cleaner ,foam gun and silicon
gun etc.
Q4:Why we choose you? What is your strength?
A4:With 30 years experiences in this field, we are a professional supplier of
the well-know customers. Our facilities conform to the standard
audit requirement and our products meet the certification terms
from different countries and areas.
Q5:What is your sample policy?
A5: We can supply 2-3 samples for free, but as this is aerosol
products with pressurized gas, it is dangerous goods, we only
supply the Cured sample.And the freight cost need to be prepaid by
customers.
If you want to know more details information, pls just feel free to
contact us! :)
