Solar Photovoltaic Stents Panels/Pv Module Silicone Sealant Jonction Boxe

Product features:

1, One-Component, neutral curing silicone glue

2, excellent insulation performance, weather aging resistance, high and low temperature resistance, ultraviolet resistance, curing in the range of -50 °C ~ 180 °C can still maintain good performance

3, excellent adhesion, no need for primer, It has good adhesion to most materials4 and has good compatibility with other neutral silicone

adhesives.

Main uses:

It is used for bonding seals of aluminum frames, glass, junction boxes, and back panels of solar photovoltaic modules.

Instructions for use:

1. Before construction, the adhesion test between the sealant and the adhesive substrate should be done to confirm the applicability of the product

2. the substrate should be used to thoroughly clean the bonded surface with a solvent or a suitable cleaning agent, keep it dry, and apply glue within 30 minutes after cleaning

3. Sizing should ensure that the gaps are adequately filled so that the adhesive layer is dense, in close contact with the surface of the substrate, and trims the seams within 5 minutes after sizing.

Restrictions on Use:

1. oily or exudate material surface should not be used

2. buried in the ground interface or long-term immersion in the occasion should not be used

3. should not be used for frost or wet surface

4. material surface temperature is less than 5 ° C or higher than 40 When °C, it is not suitable for construction.

Storage and transportation:

1. the storage period of 12 months, please use within the validity period

2. should be stored in a dry, ventilated, cool place below 27 °C, according to non-dangerous goods transportation.

Precautions:

1.please use this product in a well-ventilated environment

2.the use of solvents should comply with the corresponding safety specifications

3.please place the product in places that children can not touch

4.if accidentally by the uncured sealant contact the eyes, should immediately rinse with water or seek medical treatment.

Factory information:

Junbom now has a history of 30 years, an annual output value of 3 billion yuan, and more than 2,000 employees.

We have an advanced and complete production chain:
1. The junbom factory is close to the factory that produces the raw materials
2. The factory has ISO9001, ISO14001, ISO45001 certificates and is managed according to its system.
3. There are 58+ automatic production lines
4. There are 1100L production lines and toning glue production lines
5. The whole process production line of polyurethane foam from tank to glue
6. And many more production lines

Other advantages:
1. Cooperate with universities and have a huge R&D team
2. We also have 2 invention patents and 22 utility model patents.
3. Production of silicone sealant for 30 years, familiar with silicone sealant skills
4. The products are exported to more than 30 countries and have a good understanding of the international market

Since its establishment, Junbom Group has been focusing on the R&D, production and sales of one-component silicone rubber, two-component silicone rubber, polyurethane foam, beauty seam agent, and environmentally friendly high-elastic rubber. Six production bases have been established (Foshan Jiaolang New Material Technology Co., Ltd., Foshan Pengda New Material Technology Co., Ltd., Hubei Junbond New Material Technology Co., Ltd., Yichang Zhongzhi Environmental Protection Technology Co., Ltd., Anhui Weilang Chemical Technology Co., Ltd. , Guangdong Junbond New Material Technology Co., Ltd.), with a total production area of ​​more than 100,000 square meters, more than 1,200 employees, and total annual sales of up to 1.5 billion.

Since the birth of the group in 2016, it has entered a period of rapid development, creating the "junbom speed" in the industry. In the future, Junbom will make unremitting efforts, continue to explore, and create a new Junbom model in the industry.

A perfect production system has created a first-class enterprise, and has been committed to providing customers with first-class quality products. Now we have more than 30 advanced automatic production lines for silicone rubber, 8 production lines for styrofoam, 3 automatic production lines for beautiful seam agent, and 2 automatic production lines for environmentally friendly high-elastic rubber. All products use high-quality and high-standard raw materials. Scientific control and effective supervision of each process link of the company ensure that every product produced meets industry standards.

The overall situation will never allow us to relax, pursue the common development vision of "Going with the Junbom and Prosper the State", build the "Junbom Platform", and truly realize the win-win situation of upstream partners, outstanding employees of the group, and high-quality downstream customers.