This sealant is a kind of two components, silicone based sealant.
Special used for sealing and bonding insulating glass.
Features
1.Two components, neutral cure,Easy to apply and mix.
2.No pollution to environment, no corrosive to substrates.
3.Good Aging resistance and weather resistance,UV resistance.
4.Good adhesion and excellent adhesion to most building materials,
no peeling.
5.Anti moisture, anti-knock, anti-fade, etc
Insulating glass secondary sealing, bonding between aluminum alloy
and glass.
Hidden or semi-hidden curtain wall structure bonding and assembly,
such as glazing of unitized curtain wall systems or install curtain
wall in site
How to use
1. Mixing: Recommended ratio A component: B component = 10:1,
operating time is 25 minutes, operating time is 60 minutes. If it
is necessary to speed up or slow down the curing speed, the amount
of the B component can be increased or decreased within 15%.
2. Stirring: Use a power tool or other mixing tool to stir well.
After mixing evenly, the colloid is gray. If the color is too light
or too deep, it is necessary to continue stirring until uniform.
3. Paste: Spread the mixed hollow glass evenly before the glass and
aluminum alloy, and ensure that the substrate is tightly packed and
free of air bubbles.
4. The surface temperature of the substrate exceeds 40 degrees
Celsius, which is not suitable for construction.
5. The compatibility test of the pasting material is carried out
before use, and the construction can be carried out after passing
the test.
6. The substrate should be kept clean and dry during construction.
Product Paramenters
Product packaging
